“TITLE OF THESIS”

A Dissertation Submitted 
In partial fulfillment of the requirement for the award of the degree of 

Master of Technology
in
AEROSPACE ENGINEERING

by

Mr./Ms. XXXXXXXX
 (Regd No: XXXXXXXXX)

 Under the Esteemed Guidance of

Mr./Ms. XXXX XXXXX
Assistant/Associate Professor
A.N.E Department

DEPARTMENT OF AERONAUTICAL ENGINEERING
MALLA REDDY COLLEGE OF ENGINEERING AND TECHNOLOGY
(Autonomous Institution-UGC, Govt. of India)
Recognized under 2(f) and 12(B)of UGC ACT1956
(Affiliated to JNTUH, Hyderabad, Approved by AICTE- Accredited by NBA&NAAC-‘A’Grade-ISO 9001:2015 certified)
Maisammaguda, Dhulapally, Secunderabad-500100, Telangana State, India.
2023

DECLARATION

	I hereby declare that the project entitled “TITLE OF THESIS” submitted to Malla Reddy College of Engineering and Technology, Autonomous Institution-UGC,Govt.Of India, affiliated to Jawaharlal Nehru Technological University Hyderabad (JNTUH) for the award of the degree of Master of Technology in Aerospace Engineering is a result of original research work done by us.
	It is further declared that the project report or any part thereof has not been previously submitted to any University or Institute for the award of degree or diploma.

STUDENT NAME
	                                                                                        (Roll NO-XXXXXXXXX)

Note: This page should be printed in Letter Head of the college.

CERTIFICATE

This is to certify that this is the bonafide record of the project titled “Title of Thesis” is submitted by STUDENT NAME and Roll nos XXXXXXXX   -  of M.Tech in the partial fulfillment of the requirements for the degree of Master  of Technology in  Aerospace Engineering, Dept. of Aeronautical Engineering during the year 2022-2023. The results embodied in this project report have not been submitted to any other university or institute for the award of any degree or diploma.

XXXXXXXXXXXX					             Prof. xxxxxxxxx 
.				                     
INTERNAL GUIDE					   HEAD OF THE DEPARTMENT

                                  EXTERNAL EXAMINER

ACKNOWLEDGEMENT
	I wish to express my sincere gratitude to our Director Dr. V. S. K. Reddy for providing us with all the resources in the college to make my project a success. I thank him for his valuable suggestions throughout my graduation and he played a major role in me achieving success.

	I offer my sincere gratitude to our Principal Dr.  S. Srinivasa Rao who is the backbone in organizing the projects and encouraged us throughout the academic journey. This really motivated me in proceeding with my future course of work.
I would like to express my gratitude to Prof Misba Mehdi Head of the Department Aeronautical Engineering for her support and valuable suggestions during the dissertation work.
I must acknowledge and express my gratitude towards my internal guide Mrs/Mr. Name, Assistant Professor /Associate Professor/ Professor of Aeronautical Engineering for his/her expert suggestions and opinions which ensured that I was heading in the right direction during the entire course of this project but has also ensured that I am better equipped to complete any other project in future.
I deeply express my gratitude to our M.Tech co-ordinator Mr/Mrs.XXXXX, Asst. Prof /Assoc. Prof for all the support rendered.
I would also like to thank all the supporting staff of the Dept. of ANE and all other departments who have been helpful directly or indirectly in making the project a success. 
I am extremely grateful to my parents for their blessings and prayers for my completion of project that gave me strength to do my project.
STUDENT NAME   
(roll no)

ABSTRACT

                            

CONTENTS
   Abstract
   List of Tables
   List of Figures
   List of Abbreviations	

iii
x
xiii
xiv
   	
CHAPTER 1: INTRODUCTION 			         				1	                1.1     xxxx									 3
1.2      xxxxx									 4

CHAPTER 2: LITERATURE SURVEY						13
2.1										14	
CHAPTER 3:	XXXXXXXXXXXXXXXX					31
3.1         xxxxxxx								32
                          3.1.1 xxxxxxx							32
                          3.1.2 xxxxxx								34
CHAPTER 4: XXXXXXXXXXXXXXXXXXXXXXXX		48
CHAPTER 5: IMPLEMENTATION 						52
CHAPTER 6: EXPERIMENTAL RESULTS				89
CHAPTER 7: CONCLUSION AND FUTURE SCOPE	           	93	

APPENDIX										96

BIBLIOGRAPHY									98

Note:
1.	The report should be Prepared in A4 size paper.
2.	Entire report left margin: 1.25
		Right margin: 1
		Top margin: 1
 		Bottom margin: 1
3.	Font size for running matter: 12
Font size for sub Title: 14, BOLD
Font size for main Title: 16, BOLD, CENTER
Font style: Times New Roman.
4.	One-tab space at the beginning of each paragraph.
5.	1 ½ line spacing between lines and paragraphs, All Paragraphs should be aligned to Justification format.
6.	 No. of books (copies): 4 No.’s 
		1 copy: Department
		1 copy: Internal Guide
		1 copy: Individual
		1 copy: Library		
7.	Each page should contain footer as “Dept. of ANE, MRCET” bottom left side and page number to bottom right side.
8.	Minimum number of pages in thesis: 50 and max: 100.
9.	Figures, graphs and should have sequential numbers with caption.
10.	 Figure number and caption should be written below the figure with    center alignment.
11.	Table number and caption should be written at the top of the table.
12. Numbering for every topic has to be given like 1, 2, 3 - - - etc., and subtopic 1.1, 1.2
13 	No chapter should start with a Block diagram.
14		The Source Code of the Project should be mentioned in the Appendix Only.

NOTE: THESIS BOUND COPIES COVER COLUR SHOULD GREY (HAVE A LOOK IN THE DEPARTMENT REGARDING SAMPLE OF BOUND HARD COPY) 

BIBLIOGRAPHY

For Book

	Sl. No 		Author (s) 	Book Title	Publisher 	Year 	   Pages (PP)

For Journal / Proceedings

	Sl. No 	    Author (s) 	 Paper 	     Journal 	   Vol. No,       Year       Pages (PP)

Examples:

[1]. Gonzalez & Woods,” Digital Image Processing”, Pearson Education,2nd  edition, 2005, PP 23-135.
[2]. Wenyi Zhao and Art Pope, “Image Restoration under Signiﬁcant Additive Noise”, IEEE Signal Processing Letters, Vol. 14, No. 6, June 2007 , PP 35-42.